Split current transformer

The split current transformer is suitable for current measurement, signal sampling and microcomputer protection of electrical equipment in 10KV AC power system. The current transformer has the characteristics of small size, light weight, openable and easy to install. It is widely used in compact full-insulation ring network switch cabinets, and is very suitable for sampling units such as RTU, FTU and other remote terminal equipment. Provide data support. It is quick and easy to attach directly to the connected incoming and outgoing cable during installation. It has been widely used in compact full-insulation ring switchgear such as SafeRing/Plus, Uniswitch, RM6/SM6, SVS, GA/GE, FB, SS, etc. It is also used in combined substation and cable distribution box.

This type of current transformer uses high-quality imported silicon steel sheet with high magnetic permeability as the magnetic conductive material, which has the characteristics of iron core splittable and magnetic circuit loss. The semi-annular iron core winding is made of high quality epoxy resin vacuum casting. It is moisture-proof, stable in performance and maintenance-free in a flame-retardant plastic housing. When installing, the two half rings are stuck on the split-phase cable, hug tightly with the hoop, and integrated with the cable, which is harmonious and beautiful. The 35K2-400mm2 10KV cable can be applied. The hoop is made of high-quality stainless steel material, which is firm and reliable. No eddy currents.

According to different current ratio, accuracy level and rated load, the series of current transformers are divided into the following types. For details, please refer to the parameter table corresponding to each model. Current transformers with different specifications and parameters can be customized according to user requirements.